New Software Key
A new software key for VANTO CAT, ASSO CAT and CENTURY CAT is now available. We inform that the previous software key needed to run VANTO, ASSO and CENTURY technical softwares has expired on the 30st of June.
In order to continue using the technical softwares it will be necessary to download the new software key by going into OPT.cat's section Documentation-->Softwares or by clicking on this link.
The software key is valid for VANTO CAT, ASSO CAT and CENTURY CAT softwares but you will have to install it into every single software to make it run.
More efficient tables
LONG LIFE TO THE BATTERIES
ASSO OPERATING TABLE
To improve ASSO operating table batteries life the performance we reccomend to our technical service centers to reconfigure the system parameters.
First of all, if you do not already have them, download the ASSO CAT 2.7.2 software and 1.04 firmware.
Update the ASSO CAT software, then install the last firmware version into the operating table and finally set the parameters following the instructions that can be downloaded here.
OPTIMIZE THE TABLE PERFORMANCE
VANTO OPERATING SYSTEM
Take advantage of your next maintenance service visits to optimize the VANTO operating system performance.
The new configuration of the system will improve M3/M4 motors performance and the column telescopic structure firmness.
Find here the instructions to set the new parameters through the VANTO CAT software.
New Software Key
Dear partners,
We inform that the new software key for VANTO CAT, ASSO CAT and CENTURY CAT is available. The current software key for VANTO, ASSO and CENTURY technical softwares will expire during January 2017.
In order to continue using the technical softwares it will be necessary to download the new software key into OPT.cat's section Documentation/Softwares or by clicking on this link.
The software key is valid for VANTO CAT, ASSO CAT and CENTURY CAT softwares, however, it will be necessaty to install it into every single software to make it run.
Welcome spring
NEW RETURN FORM
DISCOVER THE NEW RETURN FORM FOR SPARE PARTS
In case of receiving an incorrect spare part or whising to return an unused brand new spare part, from now on, you will have to fill in the new return form on opt.cat.
You can have a look at the return form by clicking here.
As for all other services’ forms, upon receipt of the request, the OPT Customer Service department will process it and inform via email the outcome.
If you wish to have a list of all sent return requests, it will be possible by visiting the return requests list page.
THE LAYOUTS ARE ONLINE
LAYOUTS OF ALL OPT TABLES ARE NOW AVAILABLE
Find out how OPT tables can be composed by sections and accessories!
One of the best features about OPT tables is their modularity; a layout drawing is the best tool to understand how to configure a complete operating system and to check the compatibility between sections, accessories and tabletops.
In addition, through layouts it will be easier to see all columns and tabletops types, to look for accessories and sections codes and finally to understand tables configurations according to the surgery.
Click here to visit the new layout section and download the PDF files.
NEW FIRMWARES AND SOFTWARES
CHECK OUT THE NEW FW AND SW UPDATES FOR ASSO, CENTURY & VANTO
New firmwares for Asso [DSP 1.07] and Vanto [DSP 3.5i HMI 2.2m] have been released. New softwares updates are available too: ASSO version 2.7.7, CENTURY version 1.1.8 and VANTO version 3.4.8 .
To discover what’s new about released firmware and software versions, from today, you will always find a PDF containing the release notes for each firmware and software.
Go to the software page to download the updates or get them directly here:
News from May
NEW SOFTWARE KEY
ASSO, VANTO & CENTURY CAT
We inform you that software key of programs ASSO, VANTO and CENTURY CAT will expire in June. It will be necessary to insert the new software key, when asked by the program, in order to continue to use all softwares.
You can download the software key, that is the same for all softwares, by clicking on the button below.
FIRMWARE DSP 1.08
ASSO OPERATING TABLE
A new firmware DSP for ASSO table is now available. It is the version 1.08, which corrects a bug related to the configuration of type B batteries thresholds. For more information, I remind you that the release notes are included in the firmware folder.
Get the new version by going to the software section of opt.cat or download it through the button underneath.
WIRING AND HYDRAULIC DIAGRAMS
TWO NEW DOCUMENTIONS' SECTIONS ARE AVAILABLE
Opt.cat section for tables’ wiring and hydraulic diagrams have been updated with new documentation. You will find the diagrams of newer models like ASSO and VANTO but also older ones like OPT70/2 or OPT80/32.
We recommend you to download the PDF files from the relative section as they could turn very useful during repairs.
Christmas Closure
Happy Holidays
Dear Partners,
We inform that OPT Customer Service will be closed for Christmas Holidays from the 27th of December to the 5th of January.
Should you need to contact us for urgent spare parts orders you can do it by phone or email:
We take this opportunity to inform you that the new software key for softwares VANTO CAT, ASSO CAT and CENTURY CAT is now avalaible in OPT.cat’s softwares section. Furthermore, we remind you that the current version is going to expire on the 15th of January, so don’t forget to download it!!
We wish you fantastic holidays!
OPT Customer Service Team
New SW & FW
VANTO CAT 3.4.9
NEW SOFTWARE VANTO CAT
We inform you that a new update for software VANTO CAT has been released. Thanks to the new version 3.4.9 it will be possible to set the power supply parameters for the charging cycle directly from the table settings menu. Please follow the operating instructions below before proceeding.
#Have a look to the operating instructions.
You can download the new VANTO CAT 3.4.9 software update or setup files going to the softwares’ section or by clicking on the buttons below.
ASSO CAT 2.7.9
NEW SOFTWARE ASSO CAT
We inform you that a new update for software ASSO CAT has been released. With the new version 2.7.9 it will be possible to set the power supply parameters for the charging cycle and the batteries thresholds values directly from the table settings menu. Please follow the operating instructions below for the correct configuration.
#Have a look to the operating instructions.
You can download the new ASSO CAT 2.7.9 software update or setup files directly on the softwares’ section or by clicking on the buttons below.
VANTO FIRMWARE DSP 3.5p
A FIRMWARE CORRECTION FOR 8811 TABLETOPS
The firmware DSP version 3.5p solves a problem with tabletop model 8811-000. Only with tabletop model 8811-000 installed and by activating the longitudinal movement towards the legs section an error “movements blocked” could be generated in some particular conditions.
You can download the new VANTO FIRMWARE from the softwares’ section or by clicking on the button.
Happy Easter
VITA UPDATER 1.0.0.4
NEW SOFTWARE FOR VITA OPERATING TABLE
We inform you that a new software for Vita operating table has been released. Thanks to VITA UPDATER version 1.0.0.4 it will be possible to set some important parameters, please follow the operating instructions below before updating the system.
#Have a look to the operating instructions.
You can download the software VITA UPDATER 1.0.0.4 going to the softwares’ section or by clicking on the button below.
IMPORTANT NOTE (15/05/18)
THE NEW SOFTWARE IS NOW VITA UPDATER 1.05
VITA FIRMWARE DSP 1.08
A NEW FIRMWARE IS AVAILABLE
The firmware version DSP 1.08 will improve the table’s characteristics. Infact, thanks to this new firmware release, the table will have the floor and table’s anticollision protection and the possibility to set the recognition* of some sections installed on the tabletop. Furthermore it improves the angles degrees reading between the operating table and the display remote control.
* The sections’recognition function can be activated only by display remote controls having firmware version RCD 1.8 or higher.
#Have a look to the operating instructions.
You can download the new firmware DSP 1.08 directly on the softwares’ section or by clicking on the button below.
– Please be informed that OPT Surgisystems will be closed on Monday 2nd of April for “Pasquetta”, which is a public holiday in Italy.
New Software Key
Dear partners,
We inform that the new software key for VANTO CAT, ASSO CAT and CENTURY CAT is available. The current software key for VANTO, ASSO and CENTURY technical softwares will expire during July 2018.
In order to continue using the technical softwares it will be necessary to download the new software key into OPT.cat's section Documentation/Softwares or by clicking on this link.
The software key is valid for VANTO CAT, ASSO CAT and CENTURY CAT softwares, however, it will be necessaty to install it into every single software to make it run.
Firmwares & Softwares Key
VANTO DSP 3.5v - HMI 2.2m
A FIRMWARE SOLUTION FOR 8811000 TABLETOP
We inform you that a new firmware for VANTO operating tables has been released.
The firmware DSP version 3.5v solves a problem with tabletop model 8811000
With tabletop model 8811000 by activating the longitudinal movement and reaching the limit (towards head or legs section) an error “software extralimit – movements blocked” could
appear in some particular conditions.
You can download the firmware version DSP 3.5v – HMI 2.2m from the softwares’ section or by clicking on the button.
CENTURY DSP 2.07
A NEW FIRMWARE FOR CENTURY OPERATING TABLE
Furthermore a new firmware version for Century operating table has been released.
It is firmware DSP 2.07 that solves a problem that could occur during the operating system pickup.
With column Century Plus 8703000 and longitudinal trolley 8790000 (having height variation) during the operating system pickup the base of the column could, in some cases, collide with the trolley’s pump.
You can download the new version DSP 2.07 and the release notes directly on the softwares’ section or by clicking on the button below.
NEW SOFTWARES KEY
SOFTWARES VANTO CAT, ASSO CAT & CENTURY CAT
The new software key for VANTO CAT, ASSO CAT and CENTURY CAT is now available.
The current version is going to expire on the 15th of January 2019, so don’t forget to download it before it is too late!
You can download the new SOFTWARE KEY from the softwares’ section or by clicking on the button below.
New Operating Instructions
OI_AS-S1
ASSO FIRMWARE UPDATE
A new version (Rev1) has been released. The operating instruction shows how to update the firmware on ASSO operating table.
OI_AS-B7
PILOT VALVE INSTALLATION
How to install the pilot valve with a single pressure switch on ASSO operating table.
OI_AS-U6
HYDRAULIC CIRCUIT PURGE
A new version (Rev1) is avalaible. The operating instruction explains how to perform the hydraulic circuit purge on ASSO operating table.
OI_401-B1
STABILIZER MECHANISM UPGRADE
How to upgrade the stabilizer control mechanism on OPT 40/1 operating table.
OI_401-U1
HYDRAULIC CIRCUIT PURGE
How to perform the hydraulic circuit purge on OPT 40/1 operating table.
Vanto Firmware & Software
VANTO DSP 3.6e - HMI 3.0p
THE FIRMWARE FOR VANTO REMOTE CONTROLS WITH DISPLAY
We would like to inform you that a new firmware for Vanto operating tables has been released. The firmware DSP 3.6e – HMI 3.0p will handle the bluetooth communication for Vanto remote control with display code 8800425.
This firmware is compatible with all IR Vanto remote controls from previous versions.
You can download the firmware version DSP 3.6e – HMI 3.0p from the softwares’ section or by clicking on the button.
VANTO CAT 3.5.2
THE NEWEST SOFTWARE VANTO CAT IS AVAILABLE
Together with the new firmware version a new software VANTO CAT has been released.
As for the firmware, the version 3.5.2 will handle the Bluetooth communication for Vanto remote control with display code 8800425.
You can download the new version VANTO CAT 3.5.2 and the release notes directly on the softwares’ section or by clicking on the button below.